Mechanical properties and structural materials by Y M Song

By Y M Song

Show description

Read Online or Download Mechanical properties and structural materials PDF

Best metallurgy books

Wide-Gap Chalcopyrites

Chalcopyrites, particularly people with a large band hole, are interesting fabrics by way of their technological capability within the subsequent iteration of thin-film sun cells and by way of their easy fabric houses. They express uniquely low illness formation energies, resulting in strange doping and part habit and to super benign grain barriers.

Introduction to physical metallurgy

The most rules and purposes of the metallurgy are supplied during this e-book.

Extra resources for Mechanical properties and structural materials

Sample text

Com Keywords: steering knuckle; drilling fixture; optimization design; equivalent mechanical model; finite element Abstract. Optimization design method of drilling fixture of the steering knuckle of vehicles was studied. Based on its equivalent mechanical model established, the efficient and accurate optimization design method was proposed. Its finite element model of the optimization design was established. Its optimization structure was obtained. This optimization structure was applied to the drilling fixture of the steering knuckle of a vehicle.

The driving and driven gear of low shift 22, 25. Synchromesh elements 26. The driving gear for reverse 27. The idler gear for reverse 28. output shaft As shown in fig. M. 1. Speed ratio is changed continuously by the change of the radius that V-belt contacted with pulley which is caused by the axial movement of pulley movable sheave propelled by motor through gear and screw setups. The movable sheave can be fixed and the clamping force demanded for load can be provided by the self-lock of screw when the speed ratio coming to the goal.

R. com Key words: cylinder mechanism, finite element, static analysis , stress Abstract. In this paper, a three-dimensional solid model of the cylinder mechanism which is used in carding machine was created by Pro/E. Then the solid model was introduced into ANSYS Workbench and the stress analysis was carried out by using finite element method. Finally, the analysis result was assessed by means of the stress contours. As shown in the contours, the maximum stress concentration parts of the cylinder mechanism were obtained.

Download PDF sample

Rated 4.04 of 5 – based on 47 votes